Zinc Die Casting Manufacturer | Zamak 3 & 5, ZA-8
Zinc die casting manufacturer with hot-chamber cells for Zamak 3, Zamak 5, and ZA-8: thin-wall castings, tight tolerances, machining, plating, and high-volume production for OEM buyers.
Production Capabilities
Process visuals for zinc die casting manufacturer

Process Overview
Core die casting processes, component types, and production setups for commercial manufacturing programs.

Technical Proof
Close-up and inspection images demonstrating dimensional accuracy, surface quality, and process control in production.
KastMfg is a zinc die casting manufacturer in Nanjing, China, running dedicated hot-chamber cells for Zamak 3, Zamak 5, and ZA-8 alongside our 16 cold-chamber aluminum and magnesium machines. Buyers come to a zinc die casting manufacturer when the part is small, precise, and produced in volume - lock bodies, connectors, gears, plated hardware - and the economics only work if casting, machining, and plating quality are controlled under one roof. That is how we run the zinc side of the plant: certified SHG zinc verified on every melt by OES spectrometer, hot-chamber tooling built in-house, machining and finishing on site, and inspection records archived for every production run. This page covers what we manufacture, the alloys we run, and what to send us for a fast quotation.
Why Zinc, and When It Beats Aluminum
Zinc earns its place on a part drawing for four concrete reasons:
Thinnest achievable walls. Zinc casts reliably to 0.4 mm minimum wall thickness - thinner than any other die casting metal - so small, complex, lightweight components that aluminum cannot form stay in zinc.
Tightest dimensional accuracy. Zinc holds CT3-CT5 tolerances as-cast per ISO 8062, tighter than aluminum's CT4-CT6. Many zinc parts need no post-cast machining for dimensional features at all.
Best surface for plating. Zinc's as-cast surface finishes at Ra 0.8-1.6 μm, smoother than aluminum. That smooth base minimizes pre-plating preparation, which is why zinc is the preferred substrate for decorative chrome and nickel.
Tool life economics. Zinc's low casting temperature (385-390 °C versus roughly 650 °C for aluminum) is far gentler on H13 die steel. Properly maintained zinc dies routinely exceed 500,000 shots, and zinc parts trim burr-free - so the per-unit tooling cost collapses at high volume.
For the full alloy story and side-by-side comparisons, see zinc die casting.
Zinc Alloys We Manufacture In
- Zamak 3 - the default choice. Balanced properties, excellent castability, highest ductility in the family (10% elongation), and the standard substrate for decorative plating. Specify Zamak 3 unless the part is load-bearing.
- Zamak 5 - when strength comes first. Higher tensile strength (331 MPa) and better creep resistance than Zamak 3, at slightly lower ductility. Our choice for lock bodies and structural hardware.
- ZA-8 - the strongest hot-chamber zinc alloy, for small load-bearing components and precision industrial parts.
- ZA-12 and ZA-27 - higher-aluminum ZA grades for bearing and high-hardness applications where their properties justify a different casting route.
Each alloy has a dedicated material page with composition limits, mechanical properties, and application guidance - we link rather than duplicate those tables here.
Manufacturing Capability
| Requirement | KastMfg Capability |
|---|---|
| Casting process | Hot-chamber high-pressure die casting |
| Machine tonnage | 80T-400T |
| Common alloys | Zamak 3, Zamak 5, ZA-8 (ZA-12, ZA-27 available) |
| Minimum wall thickness | 0.4 mm standard; 0.3 mm achievable with optimization |
| Dimensional tolerance | CT3-CT5 (ISO 8062) |
| Weight range | 0.005-5 kg |
| Die life | 300,000-1,000,000+ shots |
| Cycle time | 5-15 seconds |
| Process monitoring | Injection velocity, pressure, and temperature logged every shot |
| Secondary operations | CNC machining, tapping, deburring, trimming |
| Finishes | Decorative chrome, nickel, gold plating; powder coating, painting, clear lacquer |
| Quality system | Documented quality system, maintained with reference to ISO 9001; OES spectrometer verification every melt |
All production tooling is designed and fabricated in our own tooling shop - we do not outsource die fabrication - and finishing is performed in-house or at managed partner facilities under direct quality oversight.
Parts We Commonly Produce in Zinc
- Lock bodies and hardware - padlock bodies, deadbolts, lock cylinders, window locks, cabinet hardware
- Connectors and small precision components - connector housings, terminal blocks, switch housings, shield cans
- Housings - small electronics enclosures, motor frames, relay housings
- Gears and industrial precision parts - small gears, bearing retainers, precision brackets, bushings
- Decorative plated parts - door handles, bathroom accessories, belt buckles, zipper pulls, eyewear fittings
If your component is visible, plated, or produced in the millions, it probably belongs on this list.
High-Volume Zinc Production
High volume is where a zinc die casting manufacturer pays off, and our Zamak 5 padlock body program shows what that looks like in practice. A Taiwan security hardware manufacturer came to us with a 2.4 million pieces per year program - a 3-cavity die running Zamak 5 padlock bodies, with zero tolerance for plating defects. Their previous supplier delivered a 3.2% plating rejection rate and dies needing major refurbishment at 400,000 shots.
We ran SHG zinc at 99.99% minimum purity with OES spectrometer verification on every melt, and redesigned the gate geometry to hold complete fill at a lower gate velocity. The result: zero zinc pest-related plating rejections across 2.4 million pieces, plating rejection down to 0.08%, and the first die set reaching 1,200,000 shots before scheduled gate insert replacement. As-cast Ra on visible faces measured 0.9-1.3 μm - no vibratory polishing required before plating. Read the full zinc lock body case study for the numbers.
RFQ Checklist for Zinc Die Castings
Send these items for an accurate quotation:
- 2D drawing with tolerances
- STEP or IGES 3D model
- Target alloy, or the application if you want a recommendation
- Annual volume and batch size
- Machined feature requirements (tapped holes, bores, sealing faces)
- Plating or finish specification (chrome, nickel, powder coat, lacquer)
- Critical dimensions and inspection needs
Send the package through the RFQ page.
Frequently Asked Questions
Zamak 3 or Zamak 5 for my part?
Zamak 3 unless the part is load-bearing. Zamak 3 offers the best ductility, the smoothest as-cast surface, and excellent plating response - it is the global standard for hardware, locks, and consumer components. Choose Zamak 5 when you need higher tensile strength (331 MPa versus 283 MPa) or better creep resistance, as we did on the padlock body program. The full comparison is on our Zamak 3 and Zamak 5 pages.
Can you plate zinc die castings?
Yes - plating is one of zinc's core strengths. Zinc's smooth as-cast surface (Ra 0.8-1.6 μm) makes it the preferred substrate for decorative chrome, nickel, and gold electroplating, and it also takes powder coating, painting, and clear lacquer well. On our lock body program, the as-cast finish was smooth enough that no vibratory polishing was needed before the customer's plating step. See zinc die casting plating for the process detail.
What volumes can a zinc die casting manufacturer handle?
Multi-million-piece annual programs are routine. Our reference zinc program runs 2.4 million padlock bodies per year on a 3-cavity die, with cycle times of 5-15 seconds per shot and die life measured in the hundreds of thousands of shots - properly maintained zinc dies routinely exceed 500,000 shots, and our first die set on that program reached 1,200,000. Combined with 12,000+ tonnes of annual casting capacity across the facility, volumes in the millions are exactly what hot-chamber zinc is built for.
Related
- zinc die casting
- Zamak 3
- Zamak 5
- hot chamber die casting
- zinc lock body case study
- die casting capabilities
Zinc die casting inquiry: casting@kastdiecast.com | +86 138 1403 4409 | No.6, Rungu Road, Nanjing, China
Related Resources
Next steps for zinc die casting manufacturer
Custom Zinc Die Casting for OEM Hardware & Precision Parts
Custom zinc die casting from drawings: Zamak and ZA alloys, hot-chamber HPDC, in-house tooling, CNC machining, plating, and export packaging.
Commercial GuideOEM Die Casting Parts Manufacturer
custom OEM die casting parts from drawings, including tooling, HPDC, CNC machining, finishing, inspection, and export packaging.
Buyer GuideDie Casting In China
Compare landed-risk factors, communication expectations, and supplier screening criteria.
CapabilityQuality Control
Review inspection workflow, traceability support, and process control standards before launch.
Process GuideDie Casting Process
See how casting, trimming, machining, finishing, and inspection fit together in production.
Next StepRequest a Quote
Send your drawing package and target volume to get an engineering-backed quotation.
Need a Quote for Your Project?
Our engineering team is ready to review your requirements and provide competitive pricing with fast turnaround.
Request a Quote