Stainless Steel Casting - Investment Cast 304 & 316
Stainless steel investment casting for 304, 316, and PH grades: corrosion- resistant precision parts for food, marine, chemical, and industrial OEM programs.
Production Capabilities
Supporting visuals for stainless steel casting

Manufacturing Operations
Die casting production, tooling fabrication, CNC machining, and quality inspection at our Nanjing facility.

Component Detail
Close-up views of cast components showing surface finish, dimensional features, and application-ready quality.
Stainless steel casting at KastMfg is delivered through investment casting (lost-wax). Stainless grades melt near 1,400°C (304: 1,400-1,450°C; 316: 1,375-1,400°C) - far beyond what steel die casting dies can survive - so precision stainless parts are routinely investment cast, not die cast.
We supply near-net stainless castings for food equipment, marine hardware, chemical processing, and general industrial OEM programs, with heat treatment, passivation, and CNC finishing available in-house or through qualified partners.
Buying a family of parts, some stainless and some aluminum? KastMfg runs both routes under one quality system, so a mixed BOM does not need two suppliers: stainless and steel parts through investment casting, aluminum and zinc parts through high-pressure die casting once volume passes the crossover. The decision lines are set out in die casting vs investment casting.
Grades We Supply
| Grade | Type | Typical use |
|---|---|---|
| 304 / CF8 | Austenitic | General corrosion resistance, food contact |
| 316 / CF8M | Austenitic + Mo | Marine, chemical, chloride exposure |
| 17-24 PH | Precipitation hardening | Higher strength after H900 heat treat; quoted on request |
| 410 / 416 | Martensitic | Wear and moderate corrosion |
Material certification with heat number traceability is provided on every production lot.
Stainless Casting vs Machined Bar
| Investment cast stainless | CNC from bar/plate | |
|---|---|---|
| Complex geometry | Near-net; minimal stock | High material waste |
| Internal cavities | Ceramic cores possible | Drilling/EDM only |
| Tooling | Wax die - moderate cost | No tooling |
| Break-even volume | ~100-5,000 pieces typical | Low qty CNC wins |
Surface and Finish
As-cast stainless surfaces are typically Ra 3.2-6.3 um. Common downstream steps:
- Shot blast or glass bead
- Passivation per ASTM A967 (restore corrosion resistance after handling)
- CNC machining of seats, threads, and sealing faces
- Electropolish for food and medical aesthetics (partner process)
Compare with die cast surface routes on die casting surface finishing - those apply to aluminum and zinc, not stainless castings.
Related Capabilities
- Investment casting - process hub
- Steel investment casting - carbon and alloy steel
- Lost wax casting - process overview
- Investment casting services
- Quality control - inspection and documentation
- Die casting vs investment casting
Stainless casting RFQ: casting@kastdiecast.com | +86 138 1403 4409 | No.6, Rungu Road, Nanjing, China
Image credits: Heather Smith, CC BY 3.0, via Wikimedia Commons; Heather Smith, CC BY 3.0, via Wikimedia Commons.
Related Resources
Next steps for stainless steel casting
Lost Wax Casting - Investment Casting Process Explained
Lost wax casting (investment casting) process, tolerances, alloys, and volume economics. When lost-wax precision casting beats die casting for steel, stainless, and complex geometry.
ServiceInvestment Casting Manufacturer - Lost-Wax Precision Parts
Investment casting (lost-wax) for steel, stainless, aluminum, and bronze parts: wax tooling, ceramic shell, heat treatment, CNC, and PPAP for OEM programs from 100 to 10,000+ pieces per year.
ToolingDie Casting Tooling
Understand tool build timing, cavity strategy, and how tooling decisions affect unit cost.
CapabilityQuality Control
Review inspection workflow, traceability support, and process control standards before launch.
Process GuideDie Casting Process
See how casting, trimming, machining, finishing, and inspection fit together in production.
Next StepRequest a Quote
Send your drawing package and target volume to get an engineering-backed quotation.
Need a Quote for Your Project?
Our engineering team is ready to review your requirements and provide competitive pricing with fast turnaround.
Request a Quote