Global Manufacturing Partner
Servicesteel investment casting

Steel Investment Casting - Alloy & Carbon Steel Parts

Steel investment casting for carbon and alloy grades: near-net precision parts when die casting is not possible. Heat treat, CNC, and PPAP available.

2 min read
Last updated: 2026-08-27

Production Capabilities

Supporting visuals for steel investment casting

Steel Investment Casting - Alloy & Carbon... - Manufacturing Operations

Manufacturing Operations

Die casting production, tooling fabrication, CNC machining, and quality inspection at our Nanjing facility.

Steel Investment Casting - Alloy & Carbon... - Component Detail

Component Detail

Close-up views of cast components showing surface finish, dimensional features, and application-ready quality.

Steel investment casting is the standard precision route for ferrous alloys. Die casting cannot process steel - molten steel destroys H13 dies - so buyers searching for "steel die casting" are usually looking for investment cast or forged steel. See steel die casting for why HPDC does not apply.

KastMfg supplies investment-cast carbon and low-alloy steel components for industrial OEMs: brackets, levers, linkage parts, valve bodies, and wear hardware where near-net shape reduces machining cost versus bar stock.


Steel Grades

Grade Properties Typical parts
1020 / WCB class Weldable, moderate strength General structural castings
1045 Higher carbon; harder Wear pads, gears (blank)
4140 / 8620 Alloy; heat treatable High-strength brackets, tooling
304 / 316 stainless Corrosion resistant See stainless steel casting

Heat treatment (normalize, quench & temper, carburize where applicable) is quoted per drawing requirement.


Steel Investment Casting Process Notes

  • Shrinkage allowance is built into wax tooling per alloy and section thickness
  • Section thickness uniformity reduces hot spots and shrink porosity
  • Machining stock on functional surfaces is defined at RFQ - we confirm as-cast vs machined deliverable
  • NDT (MPI, radiography) available for critical applications on request

Steel Casting vs Forging

Investment cast steel Forging
Geometry Complex, near-net Simpler; more machining
Tooling Wax die Forge die - higher for small qty
Grain flow Random cast structure Directional - better fatigue
MOQ ~100+ pieces practical Similar low-volume feasible

For non-ferrous high volume, compare die casting vs forging.



Steel casting quote: casting@kastdiecast.com | +86 138 1403 4409 | No.6, Rungu Road, Nanjing, China

Image credits: 5oclockhustle, CC BY-SA 4.0, via Wikimedia Commons; Bin im Garten, CC BY-SA 3.0, via Wikimedia Commons.

Related Resources

Next steps for steel investment casting

Need a Quote for Your Project?

Our engineering team is ready to review your requirements and provide competitive pricing with fast turnaround.

Request a Quote